Good products (hot melt adhesives) do not need to be emptied. The grandmother sells melons and sells her own boasts. The customers are always skeptical, and if they are recommended by their peers and friends, the customers trust the recommended suppliers and the transaction rate is high.
Thanks to the new and old customers' trust and support for Dongguan Zhongbang Hot Melt Adhesive. We will continue to refuel, and we also hope that you will put forward valuable suggestions. We will try our best to provide you with better management and better service. .
White transparent hot melt adhesive stick property test table
Model:YS-158#
Uses: The hot melt adhesive stick is mainly used for high requirements of electronic components, mechanical equipment, acrylic, PC board, ABS plastic bonding. High viscosity, low viscosity, no wire drawing, high bonding performance, good aging, light odor, wide adaptability to substrates, etc.
The main ingredients:
A: EVA (ethylene-vinyl acetate) 56%
B: Tackifier resin 44%
Note: The above raw materials are all imported non-toxic environmental protection material technical parameters:
Appearance: white transparent strip softening point: about 85°C
Viscosity: 180°C/4000CPS
Pull test:
A: Stainless steel sheet: 380 Newtons
B: Plastic sheet: 536 Newtons
C: Wood: 700 Newton curing time:
A: Generally 60 seconds, but the different items (such as: metal, wood, fiber sheet) are different.
B: There are differences between summer and winter. In the summer, the surface temperature of the object to be connected is high, so it is slower. In winter, the opposite is true.
C: The temperature is 25°C, and the curing time (film prevails) is about 60 seconds.
Storage method:
A: Can not withstand high temperature, the storage side in a cool place, the general storage and storage environment temperature is between 7 °C to 50 °C.
B: Avoid prolonged sun exposure.
C: The hot melt adhesive can be stored for one year if stored under the above conditions.
This information is based on our knowledge and experience and is provided for users' reference only. The use of different material quality and working conditions changes beyond our control. It is recommended to test the applicability before using this product. The company will not Take any loss caused by mistake or misuse. For more information, please consult our technical department. The company will update the above technical data on a regular basis.
